OSHA 1910 Building Rooftop Anchor Certification & Testing Verification Company Philadelphia, PA
Rooftop anchor testing is one thing that people ignore. Well, you may not know how much rooftop anchor testing can cost you if not taken care of. You have to make sure your rooftop anchors are tested to comply with OSHA 1910.27.
CALL FOR A FREE CONSULTATION
The testing helps Much if you are looking into raising the security of your property. Everyone will at one time want to feel secure and gain confidence with residents for commercial investors. You can always hire a professional to do a free survey of your roof and help you design a fall protection system that meets your specific needs.
WHAT IS TERMED A SUCCESSFUL ANCHOR
Rooftop anchors must meet a specific requirement and be correctly located in the work area for easier access. Anchorages will need to comply with the OSHA and ANSI requirements. It is, however, better if the owner opts to have the permanent rooftop anchors installed to the more so structural elements to not bring confusion over what is certified.
HOW TO DETERMINE ROOFTOP ANCHORS
You are probably wondering what to do with the testing, yet you know nothing about it. Well, you can always hire professional companies to do the testing for you. You can always choose a good company to do the on-site review to find if your current rooftop anchors meet the safety standards. It is always good to get your equipment’s load-tested to be certified. Make sure you get the written document with any recommendations and modifications that are needed for the rooftop.
WHAT ARE THE OSHA REQUIREMENTS FOR ROOFTOP ANCHOR TESTING?
Before you do any testing, you need to know that the professional you’re hiring knows the OSHA requirements for rooftop anchor testing. The requirements are pretty simple, that any person will easily understand them. It requires that building owners should inform each employee that the testing has been done and certified. As a building owner, you need to assure the employers in your building that the rooftop meets the regulation.
Further, it requires building owners to have an annual inspection and a certification for each anchorage per the rules for at least every 10 years. An employee is also not supposed to use a building without the employer’s assurance if anchorage testing of the rooftop has been done and for the whole building.
HOW FREQUENTLY SHOULD ROOFTOP ANCHORAGES BE DONE?
At least every 10 years an anchorage testing should be done and certified by a professional. This is required as per OSHA 1910.27 compliance rules for building owners.
WHY CARRY OUT A ROOFTOP ANCHOR TEST
During construction, all rooftop areas will need to be accessible when building is being done. The employee’s and contractor’s safety and health are vital. Any building is responsible for promoting a safe work environment. In case the testing reveals any defect in the roof, it can always be rectified as by a certified roofer.
The anchor certification safety team measures the anchor’s ability to hold 5,000nlbs of any given force in any direction. Having documentation of these tests will eliminate any fines for not doing the testing. The minimum penalty a building owner can accrue from not doing the test and meeting the rooftop anchor testing requirement is $15,000. The fines double if you were aware and chose not to follow OSHA’s policies.
OSHA has, over time, been updating the fall protection and safety guidelines that every building owner should follow to ensure the safety standard. It is always good to seek help from professionals who can help with the rooftop anchorage testing.